Category: Stone Tools - Cutting Tools Medium Price 
Location: China 3381 Views 
Brand: 322 Likes 
350 Granite Diamond Discs - 14 Diamond Cutting Disc
350 diamond discs for granite and 400 diamond discs are the main diamond tools which take up about 70 in our sales volume of diamond discs. The quality and prices are pretty competitive because after hundred of test on various granite and getting the feedback from the users, we had developed perfect formula/bond for hard, medium and soft granite . A couple of the most substantial and classy formula are selected and used to meet the demand of cutting various granite world-wide no matter hard or soft.
Introduction of 14inch/350mm granite diamond discs
Disc Diameter: 14inch/350mm
Disc Arbor/Center Hole: 25.4mm, 50mm, 60mm
Segment Height: 12mm, 15mm, 20mm
Segment Shape: Normal, Turbo
350 diamond disc
We adopt best steel core blank to ensure its recycling after the segments running out, good core blank provides good balance, low noise and stability during cutting . The quality diamond powder is used to make diamond segments. Thus, our granite saw blades have the advantage of good cutting performance with long life.
Diameters of diamond discs start from 4 inch to 140inch/3500mm.
The Cutting Granite of ChinShine Diamond Disc
We design and produce the 14 granite diamond disc to cut granite of different hardness, black, white, yellow, red etc. like India Red, G603, G654, G682 and G684. Our 350 granite diamond disc can be also used to cut hard brick, pavers, clay pavers, concrete without stee bar.
This 350mm diamond disc for granite slabs edge cutting most,you can put this disc on your hand grinder, bridge cutting machine, Rail saw or any other stone cutting saw
350 bridge saw
Notice of safe operation and maintenance for granite diamond discs
Make a steady cut, don't apply pressure and force to your diamond disc during cutting.
Ensure that the diamond blades do not get too hot.
Do not adjust machine when it is running.
If the blades become blunt,cut brick or sandstone or abrasive wheel to re-sharpen.
Ensure that the machine is not dropped on the blade.
Be careful to avoid burns from the overheated segments or hot engine parts.
