marketplace

service

request

Epoxy resin adhesive for Stone slab surface

Category: Stone Tools - Stone Adhesives Competitive Price   Price

Location: China 200 Views   Views

Brand: 11 Likes   Likes

Product Advantages:
1.High adhesion and strength, high penetration to small cracks,
2.Low evaporation and no odor, do no harms to workers;
3.Good age and yellowing resistance;
4.This product meet the standard of GB18583, ROHS, it is environmental friendly

Instructions:
1. Slabs treatment
Slabs should be totally dry.
Remove the mud, oil or other purity on the slab surface.
2. Prepare the glue and mix
Mix the glue by A:B4:1(by weight) completely
Please use up the glue within the pot life. The glue will be fever and is prohibited to use when beyond the pot life. The more of the glue mixed, and the higher of the temperature, the shorter the pot life. If mixed too much glue, please divide quickly to use.
Do not mix the cap of A and B. Please seal the caps anytime in case the moisture and dash from the air.
The plated with big open mouth container is recommend for glue mixing to extend the pot life of glue
3. Spreading the glue
Spread the glue evenly on the surface of slab with scrape back and forth. The recommend using weight is 80-150g/㎡。
For the micro cracks on slabs, spread glue back and forth to make the glue penetrate completely.
For the big defects on the slab, such as the soil, please remove first, then mix the glue and stone powder to fix it. Polish after cured, then spread the glue.
Please do not use the non epoxy and other slab surface treatment agent, or it will be not suitable for the epoxy glue spreading.
4. Glue solidify
The glue will be initially cured in 2-3 house under room temperature(25℃)It can be proceed to next procedure after 24 hours;
If possible, heat up the stone with adhesive to 50-60 ℃ and polish it after 3-4 hours.
Before the adhesive cured, the stone should be placed horizontally and not stacked. after cured, the lubricants such as talcum powder can be applied on the stone surface, to avoid stone adhesion when they are stacked.
5. Clean up
Use the specialized cleaner to clean the apparatus before the glue cured.

Buy Epoxy resin adhesive for Stone slab surface   Comment   Like Vote

Your Name:
Country:
Email:
Mobile:
Content:
    Open to Similar Suppliers